Product Description
16ton aluminum cap making punching machine with mould for 20mm aluminum cap
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;
c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires.
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing,
one mechanical air generator for ring blowing, air outlets and connection tubes;
g. Ring separator and conveyor belt;
h. Recoiler of waste material;
i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and
connection wires;
j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
k. Self-lubrication system of punching machine, including pump, tubes and oil container.
1.2 Capacity: 40000-45000 caps/hour for 20mm; The design working speed is 150 times/min, while the
speed 135-145 times/min is the most stable condition;
1.3 Aluminium coil width: 151-159mm (depending on the detailed cap dimension).
1.4 Output: about 2,000,000 (2 million) from 1000kg (1 ton) of aluminum coils (thickness 0.19mm)); the
output quantity will vary depending on the thickness of aluminum.
1.5 Spare parts (no addition cost): 50% parts of the 5 cavities.
1.6 Tools: Standard tools for repair and maintenance of the machine & mould.
1.7 Installation dimension: 1700*1300*1900mm;
1.8 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix
the machine to the ground.
1.9 Punching Oil required: 10# industrial white oil.
Audited Supplier 
){kind=link}
){kind=link}