pharmaceutical cap making punching machine with mould for 20mm aluminum cap
Description: Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap HS code (machine with mould): 84621090.
1.1 Components of the Machine a. 16 tons power press, 380V (compatible with 440V); b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples; c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires. d. Uncoiler and servo motor powered material feeder; e. Aluminum coil lubrication system; f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing, one mechanical air generator for ring blowing, air outlets and connection tubes; g. Ring separator and conveyor belt; h. Recoiler of waste material; i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires; j. Hand protection system, including two infrared sensors, mounting brackets and connection wires; k. Self-lubrication system of punching machine, including pump, tubes and oil container. 1.2 Capacity: 40000-45000 caps/hour for 20mm; The design working speed is 150 times/min, while the speed 135-145 times/min is the most stable condition; 1.3 Aluminium coil width: 152mm (or 151mm by final trial) 1.4 Spare parts (no addition cost):50% parts of the 5 cavities. 1.5 Tools: Standard tools for repair and maintenance of the machine & mould. 1.6 Installation dimension: 1700*1300*1900mm; 1.7 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground. 1.8 Punching Oil required: 10# industrial white oil.
Audited Supplier 
){kind=link}